This UV LED curing machine It has the advantages of advanced functionality, high reliability, strong anti-interference ability, simple and flexible user installation settings, and beautiful appearance
Main technical parameters
-
- Usage conditions
- Operating voltage: AC220V ± 10%, 50Hz
- Operating environment temperature: -15~60 ºC
- Storage temperature: -30~80 ºC
- Humidity requirement: 0-95% RH
- Working current: Based on the actual lamp head power at that time/AC220V=actual current
- Temperature display accuracy: 0.1 ºC
Characteristic
- Fixed design for easy installation
- Dot matrix LCD display, Chinese and English display interface can be set for intuitive display
- 485 interface standard MODBUS-RTU communication, address can be set (optional)
- Overload protection function and overload current value can be set (optional)
- Phase loss and reverse protection function of three-phase power supply
- Cooling temperature, lamp cap temperature over limit protection
- High voltage, low voltage protection, flow protection
- The switch input is normally open/normally closed and can be set
- Remote/infrared control switch
Controller functions
- Real time display of cooling temperature and set temperature
- Automatic memory of various parameters after power failure
- Compressor start stop delay protection
- Three phase total power display
- Three phase power supply protection
- PWM power regulation
Fault handling
If the device experiences the following types of faults during use, please try to check and solve them according to the corresponding troubleshooting methods.
| Fault phenomenon |
Cause of occurrence |
Exclusion method |
| The driver indicator light is not on |
Check if the fuse is burnt out |
Open the fuse box behind the device and check if the fuse is functioning properly |
| Illumination lamp head does not light up |
Check if the LED channel has voltage output |
Check if there is normal voltage output in channels 1 and 2 using a multimeter |
| Illumination lamp head does not light up |
Check if the signal port switch is disconnected |
Use a multimeter to measure whether the control signal interface has a long break and no closing signal. |
FAQ
1. Leadtime, 3-5 days for sample orders, 5-10 days for massive orders
2. Shipment: door-to-door, air-shipping, sea-shipping
3. Payment terms: T/T, L/C at sight, Western Union
4. Shipping port: Shenzhen, China ( or appointed port in China )
5. Discount offered based on order quantity
6. Your inquiry will be replied efficiently
7. OEM or ODM welcomed
8. Defective products within warranty period will get maintenance or replacement unconditionally.
Audited Supplier 
){kind=link}