Customizable Water-Cooled 365nm 385nm 395nm UV LED Curing Lamp for Silk Screen Flexographic Ink Printing Equipment

• Customization: Available
• Usage: Industrial use, UV Glue Curing
• Shape: Rectangle
• Model NO.: YGT-CT4800-A2
• Wavelength: UV-A
• Specification: 5kw, Emissive area: 100*1000mm
• Material: Aluminum+UV LED
• Certification: CE
• Item Name: Customizable Water-Cooled UV LED Curing Lamp
• Working Voltage: 100-277V 50Hz
• Ultraviolet Band: 365nm/385nm/395nm/405nm
• Cooling Way: Water Cooling
• Warranty: 2 Years
• LED Driver: Inventronics
• Control System: PLC
• Transport Package: Wooden Box Package
• Trademark: YGT
• Origin: Guangdong. China
• HS Code: 8543709990
• Production Capacity: 50, 000/PCS
• Package Size: 200.00cm * 200.00cm * 100.00cm
• Package Gross Weight: 850.000kg

Product Description

Customizable Water-Cooled 365nm 385nm 395nm UV LED Curing Lamp for Silk Screen Flexographic Ink Printing Equipment

UV LED light source characteristics

1. Cold light source, no heat radiation, suitable for bonding heat-sensitive materials

2. Instant on, no preheating required, with an irradiance of over 18000mW/cm².

3. Compact size allows easy integration into fully automated production lines and equipment.

4. UV LED emits no infrared radiation or harmful gases, complying with ROHS standards. It is safer and more environmentally friendly than traditional mercury lamps.

5. Over 20,000 hours of lifespan significantly reduces operating costs and maintenance time.

6.Equipped with flexible cables that can be installed in movable parts, meeting the need for frequent movement.

Model	YGT-CT4800-A2
UV LED power	4000W
Chiller power	1360W
LED wavelength	365-395-385nm
luminous power	18000mW/cm2
Heat-dissipating method	water-cooling
Emissive size	100*1000mm
Chiller size	L1600mm*W1600mm*W750mm
Weight of the distribution box	850KG

High efficiency: The light energy of LED-UV is highly concentrated in a specific ultraviolet spectrum that has effective curing properties. Its curing effect is comparable to traditional high-pressure mercury lamps with an actual intensity of 10,000-22,000mW/cm², shortening curing time. Traditional mercury lamps appear bright but generate a lot of heat due to their wide spectrum, with only a portion of the energy concentrated in the ultraviolet spectrum responsible for effective curing, while a considerable amount falls into visible light (stray light) and infrared spectrum (producing heat). This causes serious eye damage to operators and easily leads to thermal deformation of processed workpieces.
Main technical parameters

1. 1. Usage conditions
      • Operating voltage: AC220V ± 10%, 50Hz
      • Operating environment temperature: -15~60 ºC 
      • Storage temperature: -30~80 ºC
      • Humidity requirement: 0-95% RH
      • Working current: Based on the actual lamp head power at that time/AC220V=actual current 
   2. Temperature display accuracy: 0.1 ºC 

Characteristic

1. Fixed design for easy installation
2. Dot matrix LCD display, Chinese and English display interface can be set for intuitive display
3. 485 interface standard MODBUS-RTU communication, address can be set (optional)
4. Overload protection function and overload current value can be set (optional)
5. Phase loss and reverse protection function of three-phase power supply
6. Cooling temperature, lamp cap temperature over limit protection
7. High voltage, low voltage protection, flow protection
8. The switch input is normally open/normally closed and can be set
9. Remote/infrared control switch

Controller functions

1. Real time display of cooling temperature and set temperature
2. Automatic memory of various parameters after power failure 
3. Compressor start stop delay protection
4. Three phase total power display
5. Three phase power supply protection
6. PWM power regulation 

Fault handling 
If the device experiences the following types of faults during use, please try to check and solve them according to the corresponding troubleshooting methods.

Fault phenomenon	Cause of occurrence	Exclusion method
The driver indicator light is not on	Check if the fuse is burnt out	Open the fuse box behind the device and check if the fuse is functioning properly
Illumination lamp head does not light up	Check if the LED channel has voltage output	Check if there is normal voltage output in channels 1 and 2 using a multimeter
Illumination lamp head does not light up	Check if the signal port switch is disconnected	Use a multimeter to measure whether the control signal interface has a long break and no closing signal.

FAQ

Q1. Are you a trading company or a manufacturer?

A:We are a factory with our own production line, welcome to visit our factory anytime.

Q2. Can the product be customized?

A:We are a factory producing UV lamps, IR lamps and UV curing systems. All our products can be made according to the details you provide.

Q3. What about the delivery time?

A:After receiving your payment, it will be shipped within 3 days at the fastest according to the order quantity. Please consult customer service for a specific time.

Q4. About custom service?

We can provide you with suitable solutions and provide OEM services; can print your logo on your products according to your requirements; also can customize packaging for you.

Q5. About after-sales service?

A:Each lamp will be tested by our quality control department before shipment. The company solemnly promises: If the bulb is damaged during transportation and any quality problems, we will re-deliver it once it is confirmed.